Conventional high-temperature and high-pressure sterilization treatment
Packaging sterilized components with sterilization bags, tin foil or kraft paper, etc, After sterilization at 121 ℃, 1 bar, for 20 minutes, completely dry at room temperature, lubricate the piston, and then assemble.
The pipette assembled after sterilization can be used directly.
Special Reminder:
The pipette can be sterilized as a whole. During sterilization, the lower part needs to be slightly unscrewed to loosen the components. After packaging, it can be sent into the sterilization pot.
Only the lower half of the pipette can be sterilized, and the lower half of the pipette must be disassembled for sterilization before sterilization.
The filter element used with the 10ml pipette can also be sterilized under high temperature and pressure, but it can only be sterilized once. Repeated sterilization can cause the filter element to expand excessively, and it can be replaced regularly.
UV irradiation sterilization
The pipette is made of high-quality UV resistant materials, and the entire pipette and its components can be exposed to UV radiation (pay attention to covering the reading window) for surface disinfection.
