A pipette is an essential tool in life science laboratories, and there are many jokes about it among researchers. However, do you truly understand the partner you are with? Have you noticed these operational details below?
1.When installing the suction head, use a pipette to forcefully tap on the gun box?
When installing the suction head, the downward pressure should not be too strong, and there is no need to tap the nozzle connector. Simply align the pipette nozzle with the suction head and insert it firmly by gently rotating it left and right.
2.When adjusting the range, adjust the range out of the calibration range?
When setting the range, the button should not be turned out of the range within the range of the pipette, otherwise it will jam the mechanical device and damage the pipette.
3.When pipetting, to save time and quickly release the button to aspirate?
When sucking liquid, be sure to slowly and steadily release your thumb, and never suddenly release it, to prevent the solution from being sucked in too quickly and rushing into the liquid extractor, corroding the plunger and causing air leakage. When liquid is sucked into the interior of the pipette, the lower half must be disassembled according to the instructions for cleaning and re lubrication.
